N E X U S | Steel Products

Steel Products

Range of products

1. Pig Iron

A. Basic Pig Iron PL1, PL2 according to GOST 805-95 (Standard group I, II, III; classes A and B; categories 2-5) in ingots 15 kg max of pyramidal form without pinches.

B. Low Sulfur Pig Iron (Low Sulfur) according to GOST 805-95 in ingots 15 kg max of pyramidal form without pinches (S – 0.015% max)

C. Foundry iron (available in limited quantities) L1-L6 according to GOST 4832-95 (Standard group I, II; classes A and B; categories 1-4)

2. Hot rolled steel bars

(Max length of hot rolled steel bars - 6000 mm.)

Description/Standard/Dimensions, mm	Steel grade / Standart	Technical requirement Standard
Round rolled bars GOST 2590-88 diameter 12, 12,5, 13, 14, 14,5, 15, 16, 17, 18, 18,5, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 36, 38, 40, 42, 44, 45, 47, 48, 50, 52, 53, 54, 55, 56, 57, 60, 62, 65, 67, 70, 72, 75, 77, 80	St0-St6 – GOST 380-94; 10-60 - GOST 1050-88; 15Х, 20Х, 30Х, 35Х, 40Х, 45X, 18ХГТ, 25ХГТ, 30XГТ, 15-50Г, 12ХНЗА, 20ХНЗА, 40ХН, 30ХГСА, 35ХГСА, 20ХНР, 20ХГНР, 45ХН, 33ХС, 38ХС - GOST 4543-71; 65Г, (55С2, 55С2А, 60С2, 60С2А, 60С2Г diam. up to 34мм) GOST 14959-79; 09Г2С – GOST 19281-89; У7- У12 – GOST 1435-99; 25Г2 – ТУ У 332-2344-90-96; S235, S275, S355 (JO, JR, J2G3, J2G4) - EN 10025; A36/A36M – ASTM A36/A36M, 09Г2, 09Г2С – GOST 19281-89	GOST 535-88 category 1-5, group I-III, GOST 1050-88, group of surface quality 2ГП, 3ГП GOST 4543-71, group of surface quality 2-3, GOST 19281-89; GOST 14959-79, category 1, 3, 3Б, 4; GOST 1435-99 group 3ГП; ТУ У 332-234-90-96
Square rolled bars GOST 2591-88 12, 12,7, 14, 16, 22, 25, 28, 30, 32, 35, 38, 40, 42, 45, 50, 55, 60	St0-St6 - GOST 380-94; 10-50 – GOST 1050-88; 35ХГСА, 15Х-40Х - GOST 4543-71; S235, S275, S355(JO, JR, J2G3, J2G4) - EN 10025; A36/A36M – ASTM A36/A36M; 55С2, 55С2А, 60С2А- GOST 14959-79	GOST 535-88 category 1-5, group I-III, GOST 1050-88, group of surface quality, 2ГП, 3ГП, GOST 4543-71, group of surface quality 2-3, GOST 14959-79, category 1, 3, 3Б
Flat bars GOST 103-76 20х8, 10, 12; 22х6, 8, 10, 12; 25х5, 6, 8, 10, 12, 14, 16, 20; 30х5, 6, 7, 8, 10, 12, 16, 18, 20; 32х12, 18, 20, 25; 36х6, 10, 12, 14, 16, 18, 20; 40х6, 7, 8, 10, 12, 14, 16, 18, 20, 25; 45х6, 8, 10, 12, 14, 16, 18, 20, 22, 25; 50х6, 7, 8, 10, 12, 30; 56х32, 36; 60х6, 7, 8, 10, 12, 18, 25, 32; 65х6, 7, 8, 10, 12; 75х10, 12; 80х16, 30, 40; 90х9, 10, 12, 14, 16, 18, 25, 30, 40; 100х7, 8, 10, 11, 12, 14, 16; 102х10.5, 12, 14, 16; 110х7, 8, 9, 10, 11, 12, 14, 16; 120х7, 8, 9, 10, 11, 12, 14, 16; 130х7, 8, 9, 10, 11, 12, 14, 16; 140х7, 8, 9, 10, 11, 12, 14, 16; 150х7, 8, 9, 10, 12, 14, 16; 160х7, 8, 10, 12;	St0-St6 - GOST 380-94; 10-50 – GOST 1050-88; 40ХН, 45ХН, 65Г, 15Х-40Х, 18ХГТ-30ХГТ, 12ХНЗА, 20ХНР, 20ХГНР, 20ХНЗА, 30-35ХГСА – GOST 4543-71; У7, У8 – GOST 1435-90; 65Г, 55С2, 55С2А, 60С2, 60С2А, 50ХГ, 50ХГА – GOST 14959-79; 60С2ХГ – ТУ У 14-2-1205-98; 40Р – ТУ 14-1-248-95; 09Г2С GOST 19281-89; S235, S275, S355(JO, JR, J2G3, J2G4) - EN 10025; A36/A36M – ASTM A36/A36M	GOST 535-88 category 1-5, group I-III, GOST 1050-88, group of surface quality 2ГП, 3ГП, GOST 4543-71, group of surface quality 2-3; GOST 14959-79, category 1, 3, 3Б, 4, 4Б; GOST1435-99; ТУ/ТС 14-1-248-95, 14-2-1205-98

Hexagonal section bars GOST 2879-88 14, 17, 19, 21, 22, 24, 25, 27, 28, 36, 41, 43, 46, 47, 52	St0-St6 - GOST 380-94; 10-50 – GOST 1050-88; 15X-45X GOST – 4543-71; S235JR, S275JR – EN 10025; A36/A36M – ASTM A36/A36M	GOST 535-88 category 1-5, group I-III, GOST 1050-88, group of surface quality 2ГП, 3ГП, GOST 4543-71, group of surface quality 2-3
Asymmetrical bulb flat for ship-building GOST 21937-76 6, 7, 8, 9, 10	А, В, А32, D32, А40S GOST 5521-93	GOST 5521-93
Symmetrical bulb flat for ship-building GOST 9235-76 1035	А; В; А32; D32 GOST 5521-93	GOST 5521-93
Equal angle GOST 8509-93 25×25x4, 45×45x5, 50×50x6, 63×63x6, 75×75x7	St0-St6 - GOST 380-94; S235JR, S275JR – EN 10025, A36/A36M – ASTM A36/A36M	GOST 535-88 category 1-5, group I
Trapeziform spring strip ТУ У 332-234-96-99 45х6, 45х6,5	50ХГА - ТУ У 332-234-96-99	ТУ У 332-234-96-99, (not heat-treated, optional hardness, not straightened)
T-type spring strip ТУ У 14-2-1205-98 90х63х18х7,2; 100х70х16х6	60С2ХГ - ТУ У 14-2-1205-98	ТУ У/ТС 14-2-1205-98
Spring strip ТУ У 322-234-96-99 55х7, 65х7	50ХГ, 50ХГА – ТУ У 322-234-96-99	ТУ У 322-234-96-99, (without annealing, optional hardness, not straightened)
Spring strip (with round edges) ТУ 14-1-3829-84 335,5 ТУ У27.100191164-105-2003 3210	55С2, 60С2, 60С2А GOST 14959-79	ТУ 14 -1-3829-84 GOST 14959-79 (without annealing, optional hardness, not straightened)
Chute spring rolled bars GOST/GOST 7419-90 76×10, 76×13, 89×13, 120×16	55С2, 55С2А, 60С2, 60С2А -GOST 14959-79	GOST 14959-79 category 1,3, 3Б,4,4Б; GOST 7419-90
Rolled bars for shares with solid thickness ТУ 14-2-760-87 105С	Л53 ТУ 14-2-760-87	ТУ У 14-2-760-87
Rolled bars for blades of digging equipment GOST/GOST 17152-89 155×12x3	St5 - GOST 380-94; 65Г - GOST 14959-79	GOST 17152-89
Double T-shapes for hinge points №8 ТУ У 27.1-00190319-1304-2003 81,3х35х6	30ХГСА – GOST 4543-71	ТУ У 27.1-00190319-1304-2003
Profile for conveyer scraper ТУ У 77-096-172-2001 60х35х12	Ст6 GOST 380-94	GOST 535-88 group ІІ
Beetcutting knife TУ У 322-234-94-98 97х8,8х5,9	У7, У8 – GOST 1435-99	ТУ/ТС У 322-234-94–98
Strip rolled bars for machine components ТУ 14-1-341-72; 26х21	45 - GOST 1050-88	ТУ/ТС 14-1-341-72
Strip rolled bars for cultivator ТУ У 27.1-00191164-99-2003 В х А, мм 60х14мм	St0-St6 – GOST 380-94; 10-50 – GOST 1050-88	GOST 535-88 category 1-5, group I-III GOST 1050-88 group of surface quality 2ГП, 3ГП
Strip rolled bars for machine-building applications ТУ У 27.1-00191164-60-2003 ВхА, мм 90х20 100х20 120х20 140х20 160х14	St0-St6 – GOST 380-94 10-50 – GOST 1050-88 15Х-45Х, 40ХН, 45ХН, 18ХГТ-30ХГТ, 30ХГСА-35ХГСА GOST 4543-71	GOST 535-88 category 1-5, group I-III GOST 1050-88 group of surface quality 2ГП, 3ГП GOST 4543-71 group of surface quality 2-3
Rolled bars for reinforcement of steel-concrete constructions GOST/GOST 5781-82 № 12, 14, 18, 20, 25 classes AI,AII,AIII	St0-St6 – GOST 380-94; 35ГС – GOST 5781-82	GOST 5781-82
X-strips ТУ 14-2-649-85	65Г GOST 14959-79 20Х, 40Х, 45Х GOST 4543-71	ГОСТ 14959-79 category 1
Rolled bars for rail road application ТУ У 27.1- 00191164-102-2001	St4 GOST 380-94	GOST 535-88 group I
Steel profiles for tillage mechanisms 142С1 ТУ У 332-234-98-2000	50 - GOST 1050-88 ТУ 14-2-760-87	GOST 1050-88 ТУ 14-2-760-87

3. Hot rolled steel plates

(Delivery in the state «after rolling», without thermal treatment

within indicated dimensions and enclosed table of possible length)

Hot rolled steel plates with thickness 5-6mm and with width 2000mm can be produced in limited quantities.

For hot rolled steel plates with thickness 5mm - flatness normal (ПН) according to GOST 19903-74.

A. Hot rolled steel plates with the dimensions rolling according to GOST 19903-74

Description / Type

*Dimensions, mm

Technical requirement Standard

Standard /Steel grade

Hot rolled steel plates made from normal strength carbon steel of plain quality

5-20

1250-2000

3000-L*

GOST

14637-89

GOST 380-94:

St0, St2sp1, St2sp2, St3sp1, St3sp2, St3sp3, St3sp4, St3sp5, St4sp3, St5sp1, St5sp2.

Hot rolled constructional steel plates made of increased strength steel

- class of strength 265, 295, 315, 325, 345; category 1-4, 8, 10-12

5-20

1250-2000

3000-L*

GOST

19281-89

GOST 19281-89:

09Г2, 09Г2Д, 16ГС, 17ГС, 14Г2;

09Г2С, 09Г2СД, 17Г1С, 10Г2С1, 10Г2С1Д;

10ХСНД, 15ХСНД;

Hot rolled steel plates for boilers and vessels working under pressure

- category (normal strength for carbon steel) 2, 3, 4, 10

- category (increased strength for low-alloyed steel) 2, 3, 4, 10, 11, 12

5-20

1250-2000

3000-L*

GOST

5520-79

GOST 5520-79:

15K, 20K

09Г2С, 10Г2С1, 16ГС

- normal strength steel

- increased strength steel

6-20

6-16

6-20

6-16

6-20

6-16

1300-2000

1300-1850

3000-L*

GOST

5521-93

GOST 5521-93:

А, В

A27s

D27s

A32

D32

Hot rolled steel plates for shipbuilding according to the rules and under the supervision of Russian Marine Register of Shipping (PC)

- normal strength steel

- increased strength steel

6-20

6-16

6-20

6-16

1300-2000

1300-1850

3000-L*

Russian

Marine

GOST 5521-93:

РСА, РСВ

РСD

РСА32

РСD32

- normal strength steel

8; 10; 12

1400;1600

6000-8000

ТУ У 27.1-00190319-1263-2001

GOST 5521-93,

GOST 380-94

А, РСА, Ст3сп

B. Hot-rolled general purpose and constructional steel plates according to International Standards

Description / Type

*Dimensions, mm

Standard

Standard / Steel grade

Possible length (L*) of the hot rolled steel plates on rolling mill 2300, м

*Length:

Numerator – for GOST 19903-74 and for classes А, D according to EN 10029;

Denominator – for Registers Rules (РС, LR, GL, BV, NV), ASTM A6/A6M and classes B, C according to EN 10025

Leave a comment...

You need to login before submit comment. | Check the box to save Password (Uncheck if on a shared computer)

Forgot password?

Comment posting guidelines.

We appreciate every comment and for the sake of civility and fairness to everyone, we review all comments. No comment will be published unless it meets our simple guidelines. So be nice and speak up!

1. Here are a few things to consider as you write:

Be considerate and respectful of your fellow posters.
Do not use profanity, vulgarity, obscenities, or inappropriate language.
Do not harass, abuse, or threaten another's personal safety or property, make false statements, defame, or impersonate someone else.
No commercial promotions are allowed.
Do not post personal information like your phone number, mailing addresses, bank account number, credit card information or national id card numbers.

2. We reserve the discretion to remove comments that:

Contain obscene, indecent, or profane language;
Contain threats or defamatory statements;
Contain personal attacks or insulting statements directed toward an individual;
Contain hate speech directed at race, color, sex, sexual orientation, national origin, ethnicity, age, religion, or disability; or
Promote or endorse services or products.
(Note that non-commercial links that are relevant to the topic or another comment are acceptable.)

Steel Products

Square rolled bars

Flat bars

Hexagonal section bars

Asymmetrical bulb flat for ship-building

GOST 21937-76

Symmetrical bulb flat for ship-building

GOST 9235-76

1035

Equal angle

GOST 8509-93

25×25x4, 45×45x5, 50×50x6, 63×63x6, 75×75x7

Trapeziform spring strip

ТУ У 332-234-96-99

45х6, 45х6,5

T-type spring strip

ТУ У 14-2-1205-98

90х63х18х7,2; 100х70х16х6

Spring strip

ТУ У 322-234-96-99

55х7, 65х7

Spring strip (with round edges)

ТУ 14-1-3829-84 33*5,5

Chute spring rolled bars

GOST/GOST 7419-90

76×10, 76×13, 89×13, 120×16

Rolled bars for shares with solid thickness

ТУ 14-2-760-87 105С

Rolled bars for blades of digging equipment

GOST/GOST 17152-89

155×12x3

Double T-shapes for hinge points №8

ТУ У 27.1-00190319-1304-2003

81,3х35х6

Profile for conveyer scraper

60х35х12

Beetcutting knife

TУ У 322-234-94-98

97х8,8х5,9

Strip rolled bars for machine components

ТУ 14-1-341-72; 26х21

Strip rolled bars for cultivator

Strip rolled bars for machine-building applications

Rolled bars for reinforcement of steel-concrete constructions

GOST/GOST 5781-82

№ 12, 14, 18, 20, 25 classes AI,AII,AIII

Rolled bars for rail road application

Steel profiles for tillage mechanisms

142С1

ТУ У 332-234-98-2000

*Dimensions, mm

Standard /Steel grade

Hot rolled steel plates for boilers and vessels working under pressure

*Dimensions, mm